张超敏,张庭芳,何新毅,谢世坤,王千亮.基于Geomagic某款汽车模型车身逆向造型设计[J].井冈山大学自然版,2015,(4):55-58 |
基于Geomagic某款汽车模型车身逆向造型设计 |
REVERSE MODELING DESIGN FOR CAR BODY BASED ON GEOMAGIC |
投稿时间:2015-04-16 修订日期:2015-05-06 |
DOI:10.3969/j.issn.1674-8085.2015.04.010 |
中文关键词: 逆向工程 车身点云 Geomagic Studio NURBS曲面 偏差分析 |
英文关键词: reverse engineering car body point cloud Geomagic Studio NURBS surfaces deviation analysis |
基金项目:国家自然科学基金项目(51165010);江西省高等学校科技落地计划项目(KJLD14066) |
作者 | 单位 | E-mail | 张超敏 | 南昌大学机电工程学院车辆工程研究所, 江西, 南昌 330031 | | 张庭芳 | 南昌大学机电工程学院车辆工程研究所, 江西, 南昌 330031 | tfzhang@ncu.edu.cn | 何新毅 | 南昌大学机电工程学院车辆工程研究所, 江西, 南昌 330031 | | 谢世坤 | 南昌大学机电工程学院车辆工程研究所, 江西, 南昌 330031 井冈山大学机电工程学院, 江西, 吉安 343009 | | 王千亮 | 南昌大学机电工程学院车辆工程研究所, 江西, 南昌 330031 | |
|
摘要点击次数: 2151 |
全文下载次数: 2486 |
中文摘要: |
逆向工程是基于现有的产品进行再设计,再生产,可以缩短研发周期、节省研发经费、提高产品效益,是现代设计非常重要的研究手段。通过激光抄数机扫描测量得到保时捷汽车模型车身的点云数据,然后使用Geomagic Studio软件对测取的点云进行优化处理,并进行多边形阶段的编辑及形状阶段的处理,构建出完整的NURBS曲面,最后对生成的车身曲面进行偏差分析,得到能用于CAD/CAM阶段的车身曲面模型。结果表明,该研究方法可以作为车身设计的一种有效的方法。 |
英文摘要: |
Reverse engineering, an approach to redesign and reconstruction the finished-product, is regarded as a crucial means of modern design. It can shorten the cycle of research, reduce the cost and improve the efficiency of products. Through a laser scanner measured a point-clouded datum of a Porsche car, we optimized the point cloud and edited in the Polygon stage and processed in the shape stage by the Geomagic Studio software. After these steps, a complete NURBS surface is built. Finally, by means of deviation analysis on the body surface, a surface model which can be used in CAD/CAM stage is produced. The results suggest that this research method can be used as an effective method to design the car body. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|