文章摘要
于俊涛,吴妙春,程熙,张桂芳,古瑶,李莹莹,温玉锋,孙心瑗.高密度TeO2-Gd2O3-WO3闪烁玻璃颜色调控的研究[J].井冈山大学自然版,2023,44(4):18-23
高密度TeO2-Gd2O3-WO3闪烁玻璃颜色调控的研究
AN INSIGHT ON THE COLOR TUNABILITY OF DENSE TeO2-GdO2-WO3 GLASS SCINTILLATOR
投稿时间:2023-01-13  修订日期:2023-03-23
DOI:10.3969/j.issn.1674-8085.2023.04.004
中文关键词: 碲钆钨酸盐玻璃  WO3  光学透过性能  颜色调控
英文关键词: TeO2-Gd2O3-WO3 glass  WO3  optical transmittance  color adjustment
基金项目:国家自然科学基金项目(12065010);江西省教育厅科技计划项目(GJJ211005);江西省大学生创新创业训练计划项目(S202210419010);井冈山大学创新创业训练计划项目(2005105022,2105104019)
作者单位
于俊涛 井冈山大学数理学院, 江西, 吉安 343009 
吴妙春 井冈山大学数理学院, 江西, 吉安 343009 
程熙 井冈山大学数理学院, 江西, 吉安 343009 
张桂芳 井冈山大学数理学院, 江西, 吉安 343009 
古瑶 井冈山大学数理学院, 江西, 吉安 343009 
李莹莹 井冈山大学数理学院, 江西, 吉安 343009 
温玉锋 井冈山大学数理学院, 江西, 吉安 343009 
孙心瑗 井冈山大学数理学院, 江西, 吉安 343009 
摘要点击次数: 271
全文下载次数: 331
中文摘要:
      采用传统高温熔融法制备了不同玻璃组成的碲钆钨酸盐玻璃(TeO2-Gd2O3-WO3),通过紫外—可见分光光度计研究了碲钆钨酸盐玻璃在分别固定Gd2O3浓度为10 mol%(xTeO2-10Gd2O3-(90-x)WO3)和20 mol%(yTeO2-20Gd2O3-(80-x)WO3)时,玻璃光学透过性随WO3浓度和熔制温度的依赖关系,并借助光碱度理论进行了解释。结果表明,xTeO2-10Gd2O3-(90-x)WO3玻璃随着玻璃中WO3浓度由0 mol%增加到60 mol%,碲钆钨酸盐玻璃的颜色由浅黄(低于20 mol%)逐渐变为深棕色(40 ~ 60 mol%)。另一方面,yTeO2-20Gd2O3-(80-y)WO3(y=40)玻璃随着玻璃熔制温度从1000 ℃升高到1200 ℃,碲钆钨酸盐玻璃的颜色从浅黄(低于1050 ℃),变为深棕色(1100 ℃)甚至黑色(1200 ℃)。这种颜色变化是由于随WO3浓度升高,玻璃的光碱度单调增加,导致玻璃截止吸收边红移及玻璃光学透过率降低的共同作用效果。
英文摘要:
      The tellurite-gadolinium-tungstate glasses (TeO2-Gd2O3-WO3) with different glass compositions were prepared by the traditional high-temperature melting method, and the color dependence of TeO2-Gd2O3-WO3 glasses with the fixed content at 10 mol% (xTeO2-10Gd2O3-(90-x)WO3) and 20 mol% (yTeO2-20Gd2O3-(80-x)WO3) were evaluated by the optical ultraviolet-visible transmittance, and the color change were explained via the optical basicity of the as-synthesized TeO2-Gd2O3-WO3 glasses. It was found that the color of the as-synthesized xTeO2-10Gd2O3-(90-x)WO3 glasses gradually changes from light yellow (less than 20 mol%) to dark brown (40 ~ 60 mol%) with the increasing content of WO3 from 0 to 60 mol%. On the other hand, the color of the as-synthesized yTeO2-20Gd2O3-(80-y)WO3 (y=40) glasses changes as a function of melting temperature, from light yellow (below 1050 ℃) to dark brown (1100 ℃) or even black (1200 ℃). This color change results from the combined effect of the red shift of the cut-off absorption edge, that induced by the monotonous increase of the optical basicity, and the decreasing optical transmittance of TeO2-Gd2O3-WO3 glasses.
查看全文   查看/发表评论  下载PDF阅读器
关闭