| 肖忠跃,刘丁宁,袁慧羚.基于正交试验法的熔融沉积快速成形工艺参数优化研究[J].井冈山大学自然版,2018,(3):74-76 |
| 基于正交试验法的熔融沉积快速成形工艺参数优化研究 |
| STUDY ON OPTIMIZATION OF RAPID PROTOTYPING PROCESS PARAMETERS BASED ON ORTHOGONAL TEST |
| 投稿时间：2017-11-02 修订日期：2018-04-18 |
| DOI：10.3969/j.issn.1674-8085.2018.03.015 |
| 中文关键词: 正交试验 熔融沉积 快速成形 |
| 英文关键词: orthogonal test fused deposition rapid prototyping |
| 基金项目:江西省教育厅科技项目（GJJ150774）；吉安市科技计划项目（吉市科计字[2014]4号） |
|
| 摘要点击次数: 1622 |
| 全文下载次数: 1961 |
| 中文摘要: |
| 建立了以缩小成形样件表面条纹间距为目标，成形层厚ap和成形室温度T为因素的2因素5水平正交试验，研究了熔融沉积快速成形工艺参数优化问题，得到了成形层厚是影响表面质量的主要因素以及在环境温度为28℃时最佳成形层厚ap和成形室温度T的参数水平分别为0.2 mm和50℃，该方法对于研究其它特种加工方法的工艺参数优化提高工艺效益具有一定借鉴作用。 |
| 英文摘要: |
| Orthogonal experiment of 2 factors and 5 levels was established based on the forming layer thickness ap and forming chamber temperature T with the aim of reducing the surface stripe pitch, and the optimization of the process parameters of the melt deposition rapid prototyping was studied, and obtained the forming layer thickness is the main factor affecting the surface quality and at 28 ° C ambient temperature the optimal forming layer thickness ap and forming chamber temperature T are 0.2mm and 50℃, respectively. This method has certain reference value for studying the process parameters of other special processing methods and improving the process efficiency. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
