| 肖寿仁.汽车翼子板成形工艺分析及方案优化[J].井冈山大学自然版,2017,(4):78-82 |
| 汽车翼子板成形工艺分析及方案优化 |
| ANALYSIS AND OPTIMIZATION OF AUTOMOBILE FENDER FORMING PROCESS |
| 投稿时间：2016-10-26 修订日期：2017-02-13 |
| DOI：10.3969/j.issn.1674-8085.2017.04.014 |
| 中文关键词: 汽车翼子板 成形工艺 方案优化 数值模拟 |
| 英文关键词: automobile fender forming process optimization numerical simulation |
| 基金项目:江西省自然科学基金项目（2015ZBAB206009） |
|
| 摘要点击次数: 1800 |
| 全文下载次数: 2725 |
| 中文摘要: |
| 通过现场调研、研究问题单，运用Dynaform软件对翼子板的冲压成形进行了数值模拟，研究了汽车翼子板成形工艺和与发动机盖、A柱、前门和大灯等配合处的成形工艺性，通过仿真得出汽车翼子板成形工艺及相应的优化方案，为汽车翼子板成形模具设计提供理论依据。 |
| 英文摘要: |
| Through on-site research and research questionnaires, the forming process of the fender was simulated by using Dynaform software and the forming process-ability of automobile fender, engine cover, A-pillar, front door and headlamp were studied. The forming process and corresponding optimization scheme of automobile fender are obtained by simulation, which can provide theoretical basis for the design of automobile fender forming mold. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
