文章摘要
陆子飚,陶锋,阮东城,王志俊,孙宇峰.六方相NaSmF4纳米棒的水热合成与发光性能[J].井冈山大学自然版,2015,(3):80-83,102
六方相NaSmF4纳米棒的水热合成与发光性能
Hydrothermal Synthesis and Luminescence Properties of Hexagonal NaSmF4 Nanorods
投稿时间:2014-10-27  修订日期:2014-11-28
DOI:10.3969/j.issn.1674-8085.2015.03.016
中文关键词: NaSmF4  纳米棒  水热合成  发光性能
英文关键词: NaSmF4  nanorods  hydrothermal synthesis  luminescence properties
基金项目:安徽省高等学校省级优秀青年人才基金项目(2012SQRL082ZD);安徽省高等学校省级自然科学研究项目(KJ2013A038, KJ2013B032);国家自然科学基金项目(61174012, 51275001)
作者单位E-mail
陆子飚 安徽工程大学机械与汽车工程学院, 安徽, 芜湖 241000  
陶锋 安徽工程大学机械与汽车工程学院, 安徽, 芜湖 241000
安徽高性能有色金属省级实验室, 安徽, 芜湖 241000 
taozhi@ahpu.edu.cn 
阮东城 安徽工程大学机械与汽车工程学院, 安徽, 芜湖 241000  
王志俊 安徽工程大学机械与汽车工程学院, 安徽, 芜湖 241000
安徽高性能有色金属省级实验室, 安徽, 芜湖 241000 
 
孙宇峰 安徽工程大学机械与汽车工程学院, 安徽, 芜湖 241000
安徽高性能有色金属省级实验室, 安徽, 芜湖 241000 
 
摘要点击次数: 2102
全文下载次数: 3017
中文摘要:
      采用EDTA辅助水热法,在较低的温度下合成了形貌规则的六方相NaSmF4纳米棒.分别采用X射线衍射(XRD)、场发射扫描电镜(FESEM)、高分辨透射电子显微镜(TEM)、选区电子衍射(SAED)、稳态荧光光谱仪等对合成的样品的结构、形貌和发射光谱进行表征.XRD分析表明产物为纯净的六方相结构;FESEM和TEM分析表明产物形貌为单一的、均匀的六棱柱纳米棒,端面直径约为80 nm、长度约为500 nm;分析了NaSmF4纳米棒可能的生长机理;研究了发射光谱(λex=400 nm)分析表明其在560 nm,593 nm,640 nm和703 nm处存在较强的发光峰,其中最强峰为593 nm处.
英文摘要:
      Hexagonal NaSmF4 nanorods were successfully synthesized by a mild hydrothermal method assisted by EDTA. X-ray diffraction (XRD), field emission scanning microscopy (FE-SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and selected area electron diffraction(SAED) have been used to study the phase, morphologies, and crystal structure. The XRD analysis showed that the product was pure hexagonal structure. The FESEM and TEM showed that the morphology of the products were single, uniform hexagonal prism nanorods, the diameter of end face about 80nm and the average length of nanorods about 500nm. The possible growth mechanism NaSmF4 was analyzed. The emission spectra (λex = 400 nm) showed that the 560 nm, 593 nm, 640 nm and 703 nm at the presence of strong emission peak, where the strongest peak at 593 nm.
查看全文   查看/发表评论  下载PDF阅读器
关闭