文章摘要
杨水金,黄永葵,邓丽娇,聂玲.二氧化硅负载硅钨酸催化合成环己酮1,2-丙二醇缩酮[J].井冈山大学自然版,2011,(6):38-40
二氧化硅负载硅钨酸催化合成环己酮1,2-丙二醇缩酮
CATALYTIC SYNTHESIS OF CYCLOHEXANONE 1,2-PROPANEDIOL KETAL WITH H4SiW12O40/SiO2
  
DOI:
中文关键词: 环己酮1,2-丙二醇缩酮  硅钨酸  二氧化硅  催化
英文关键词: cyclohexanone 1,2-propanediol ketal  H4SiW12O40/SiO2
基金项目:湖北省自科基金项目(ZRY0150);湖北省重点实验室开放基金项目(KY2010G13)
作者单位
杨水金,黄永葵,邓丽娇,聂玲 湖北师范学院化学与环境工程学院污染物分析与资源化技术湖北省重点实验室 
摘要点击次数: 2423
全文下载次数: 0
中文摘要:
      采用溶胶-凝胶法制备了二氧化硅负载硅钨酸催化剂。以其为催化剂,对以环己酮和1,2-丙二醇为原料合成环己酮1,2-丙二醇缩酮的反应条件进行了研究,较系统地研究了酮醇物质的量比、催化剂用量、带水剂环己烷,反应时间对收率的影响。实验表明,二氧化硅负载硅钨酸催化剂是合成环己酮1,2-丙二醇缩酮的良好催化剂,在n(环己酮):n(1,2-丙二醇)=1:1.5,带水剂环己烷的用量为12mL,反应时间45min,催化剂用量为原料总质量的0.8%的优化条件下,产品的收率可达85.9%。
英文摘要:
      A novel catalyst,H4SiW12O40/SiO2 was synthesized by a sol-gel technique,and characterized by FT-IR and XRD.Cyclohexanone 1,2-propanediol ketal was synthesized from cyclohexanone and 1,2-propanediol in the presence of H4SiW12O40/SiO2.The factors influencing the synthesis were discussed and the best conditions were found out.The optimum conditions are:molar ratio of cyclohexanone to 1,2-propanediol is 1:1.5,the quantity of catalyst is equal to 0.8% of feed stocks,and the reaction time is 45 min.H4SiW12O40/SiO2 is an excellent catalyst for synthesizing cyclohexanone 1,2-propanediol ketal and its yield can be up to 85.9%.
查看全文   查看/发表评论  下载PDF阅读器
关闭